| Regenerative Catalytic Oxidizer (RCO) | ReCat Series |
American Environmental Fabrication & Supply (AEFS) has several models and sizes of the ReCat Series
of catalytic thermal oxidizers, starting with the ReCat Series 50 with four models up to the ReCat Series 250.
The ReCat Systems start at 5,000 SCFM with incremental increases up to 25,000 SCFM.
Our advanced technology allows the placement of the catalyst media on top the thermal heat recovery bed
which has up to 95% heat recovery. Should your plant emissions increase or the catalytic bed foul over the
years - you may still operate by elevating operating temperatures and running as a regenerative thermal
oxidizer. This unique system allows for a better range of waste-gas and assures that you have the proper
destruction without equipment change-out and hundreds of thousands of dollars in new equipment. You may
choose to either purchase, rent or place your equipment on a long term service agreement, the benefits are
explained in many of the pages.
ReCat Series of Catalytic Thermal Oxidizers may be designed for either induced or forced draft, depending
on your requirements. Listed below is a summary of the catalytic thermal oxidizer system and subsystems. We
offer a Free Process Analysis Complete With Free RCO system proposal. If you would like to
make a visit to the plant, one of our models are usually available for inspection, testing and operation with full
run DCS/SCADA integration and control.
Regenerative catalytic oxidizers operate at substantially lower temperatures than thermal oxidizers. Due to the
presence of the catalyst, oxidation reactions can be performed at temperatures in the range of 500 to 1000°F.
Common types of catalysts include noble metals (i.e. Platinum and palladium) and ceramic materials. VOC
destruction by catalytic oxidizers usually exceeds 99%.
Catalytic oxidizers are also applicable to a wide range of VOC-laden streams; however, they cannot be used on
sources that also generate small quantities of catalyst poisons. Catalyst poisons are compounds that react
chemically in an irreversible manner with the catalyst. Common catalyst poisons include phosphorus, tin, and
zinc. Another potential operating problem associated with catalytic oxidizers is their vulnerability to chemicals
and/or particulate matter that masks or fouls the surface of the catalyst. (Masking is the reversible reaction of a
chemical with the catalyst and fouling is the coating of the catalyst with a deposited material.) If the conditions
are potentially severe, catalytic units should not be installed.
ReCat Series Model Features
American Environmental Fabrication & Supply - offers you the opportunity to use the ReCat Series
Regenerative Catalytic Oxidizer (RCO) Equipment for 90 days. If you are not completely satisfied with the
catalytic thermal oxidizer product we will pick it up, no disputes or questions asked. If, after you use the product
and compare the price and quality to whats available on the market. You may choose to Rent, Long Term
Service Agreement or Purchase. We stand behind all of our air pollution control equipment. This is our way of
saying that we are offering you a high quality catalytic thermal oxidizer at the right price that will function as
described. We offer equipment that will give you years of dependability.
of catalytic thermal oxidizers, starting with the ReCat Series 50 with four models up to the ReCat Series 250.
The ReCat Systems start at 5,000 SCFM with incremental increases up to 25,000 SCFM.
Our advanced technology allows the placement of the catalyst media on top the thermal heat recovery bed
which has up to 95% heat recovery. Should your plant emissions increase or the catalytic bed foul over the
years - you may still operate by elevating operating temperatures and running as a regenerative thermal
oxidizer. This unique system allows for a better range of waste-gas and assures that you have the proper
destruction without equipment change-out and hundreds of thousands of dollars in new equipment. You may
choose to either purchase, rent or place your equipment on a long term service agreement, the benefits are
explained in many of the pages.
ReCat Series of Catalytic Thermal Oxidizers may be designed for either induced or forced draft, depending
on your requirements. Listed below is a summary of the catalytic thermal oxidizer system and subsystems. We
offer a Free Process Analysis Complete With Free RCO system proposal. If you would like to
make a visit to the plant, one of our models are usually available for inspection, testing and operation with full
run DCS/SCADA integration and control.
Regenerative catalytic oxidizers operate at substantially lower temperatures than thermal oxidizers. Due to the
presence of the catalyst, oxidation reactions can be performed at temperatures in the range of 500 to 1000°F.
Common types of catalysts include noble metals (i.e. Platinum and palladium) and ceramic materials. VOC
destruction by catalytic oxidizers usually exceeds 99%.
Catalytic oxidizers are also applicable to a wide range of VOC-laden streams; however, they cannot be used on
sources that also generate small quantities of catalyst poisons. Catalyst poisons are compounds that react
chemically in an irreversible manner with the catalyst. Common catalyst poisons include phosphorus, tin, and
zinc. Another potential operating problem associated with catalytic oxidizers is their vulnerability to chemicals
and/or particulate matter that masks or fouls the surface of the catalyst. (Masking is the reversible reaction of a
chemical with the catalyst and fouling is the coating of the catalyst with a deposited material.) If the conditions
are potentially severe, catalytic units should not be installed.
ReCat Series Model Features
- Automatic Hot Air By-Pass
- Hot Galvanized Dipped
- Heat Recovery Chamber
- Combustion Chamber
- Lower-Explosive-Limit (LEL) Monitoring Device
- Variable Frequency Drive (VFD's)
- Spark Resistant Premium Efficiency Fan
- Dual Automated Burner
- Programmable Logic Controller (PLC)
- Combustion Air System
- O2 Monitoring System
- Burner Safety Management PLC
- Distributed Control System (DCS)
American Environmental Fabrication & Supply - offers you the opportunity to use the ReCat Series
Regenerative Catalytic Oxidizer (RCO) Equipment for 90 days. If you are not completely satisfied with the
catalytic thermal oxidizer product we will pick it up, no disputes or questions asked. If, after you use the product
and compare the price and quality to whats available on the market. You may choose to Rent, Long Term
Service Agreement or Purchase. We stand behind all of our air pollution control equipment. This is our way of
saying that we are offering you a high quality catalytic thermal oxidizer at the right price that will function as
described. We offer equipment that will give you years of dependability.
American Environmental Fabrication & Supply LLC Fax: +1 (918) 772-3536
18991 S 410 Road Hulbert, OK 74441-1861 info@american-environmental.us
© 2010 All Rights Reserved. Visit our sitemap page for more information or contact the Webmaster.
18991 S 410 Road Hulbert, OK 74441-1861 info@american-environmental.us
© 2010 All Rights Reserved. Visit our sitemap page for more information or contact the Webmaster.
Air Pollution Control Equipment
American Environmental Fabrication & Supply, LLC
Worldwide Shipping
Call +1 (918) 708 - 1253
Products
Regenerative Catalytic Oxidizer (RCO)
Regenerative Thermal Oxidizer (RTO)
Direct Fired Thermal Oxidizer (DFTO)
Low NOx Burners <9ppm (NOx)
VOC Concentrator Systems (TSRA)
Nitrogen Rejection System (PSA)
Filtercrobe I Bio-Filtration (GACBF)
Carbon Bed Adsorption Canister (GAC)
Micro Turbine Waste Heat Energy
AgriMicrobe Sales Formula V
Product Inquiry
Product Questionnaire
Services
Service Inquiry
Spent Carbon Reactivation Program
Air Pollution Control Equipment Services
Purchase Plans
Buying and Service Agreement Plans
Rental Plans (Short/Long Term)
Energy Performance Agreement
Services
Service Inquiry
Spent Carbon Reactivation Program
Air Pollution Control Equipment Service
System Information
Equipment Control
Electrical Cost Reduction
Air Pollution Equipment Explosion Protection
Equipment Reliability
Equipment Protection
Reducing Emissions
Programmable Logic Controls
Ceramic Fiber Protection
Ceramic Saddles Usage
Structured Ceramic Heat Media
Extending Equipment Life
Information On Process & Treatment
Buying a Regenerative Thermal Oxidizer
Common Thermal Oxidizer Buying Mistake
Hydrogen Sulfide Reduction
Optimum RTO Operation
Understanding Soil Vapor Extraction
Reducing Costs of VOC Abatement
Wastewater VOC Abatement
Different Types of Thermal Oxidizers
What is a Regenerative Catalytic Oxidizer
The Correct Air Pollution Control Product
Coffee, Rendering, Bakery and Fishmeal
Natural Gas Processing and Oil Refineries
Cement Plant Air Pollution Control
Landfill Gas Requirements & Technology
Controlling Carbon Monoxide Plant Emissions
Photos Thermal Oxidizers
Photos of Air Pollution Control Equipment
Photos of Rebuilt Equipment
Photos of Installation - Relocation Services
Helpful Links
Environmental Organization Links
Environmental AEFS Blog
Regenerative Catalytic Oxidizer (RCO)
Regenerative Thermal Oxidizer (RTO)
Direct Fired Thermal Oxidizer (DFTO)
Low NOx Burners <9ppm (NOx)
VOC Concentrator Systems (TSRA)
Nitrogen Rejection System (PSA)
Filtercrobe I Bio-Filtration (GACBF)
Carbon Bed Adsorption Canister (GAC)
Micro Turbine Waste Heat Energy
AgriMicrobe Sales Formula V
Product Inquiry
Product Questionnaire
Services
Service Inquiry
Spent Carbon Reactivation Program
Air Pollution Control Equipment Services
Purchase Plans
Buying and Service Agreement Plans
Rental Plans (Short/Long Term)
Energy Performance Agreement
Services
Service Inquiry
Spent Carbon Reactivation Program
Air Pollution Control Equipment Service
System Information
Equipment Control
Electrical Cost Reduction
Air Pollution Equipment Explosion Protection
Equipment Reliability
Equipment Protection
Reducing Emissions
Programmable Logic Controls
Ceramic Fiber Protection
Ceramic Saddles Usage
Structured Ceramic Heat Media
Extending Equipment Life
Information On Process & Treatment
Buying a Regenerative Thermal Oxidizer
Common Thermal Oxidizer Buying Mistake
Hydrogen Sulfide Reduction
Optimum RTO Operation
Understanding Soil Vapor Extraction
Reducing Costs of VOC Abatement
Wastewater VOC Abatement
Different Types of Thermal Oxidizers
What is a Regenerative Catalytic Oxidizer
The Correct Air Pollution Control Product
Coffee, Rendering, Bakery and Fishmeal
Natural Gas Processing and Oil Refineries
Cement Plant Air Pollution Control
Landfill Gas Requirements & Technology
Controlling Carbon Monoxide Plant Emissions
Photos Thermal Oxidizers
Photos of Air Pollution Control Equipment
Photos of Rebuilt Equipment
Photos of Installation - Relocation Services
Helpful Links
Environmental Organization Links
Environmental AEFS Blog
