American Environmental Fabrication & Supply has formulated the correct blend of bacteria specified for
the oxidation of hydrocarbons. Treatment is generally set at a level consistent with levels that can be
discharged into a city sewer system or a septic tank system. The bacteria blend can be even sprayed
onto the ground for spilled hydrocarbons. The bacteria have been shown to effectively recycle a wide
range of organic waste materials by being formed as a dry, the powder material with a
3-year shelf life.

The product is usable in either fresh or salt water. The formulation has a high concentration of microbes
and is non-toxic itself. The blended formula is composed of a microorganism mixture of single cell
organisms and several enzymes ranging in size from
1 to 10 microns, with a pH range of 5.50 to 9.00
and a
temperature tolerance of 40 to 120° F.

The bacteria are aerobic, meaning that they require oxygen to facilitate oxidation. These
micro-organisms are used to degrade the substances listed below into non-hazardous byproducts, such
as carbon dioxide and water without forming any biological sludge. Below are some of the products which
these specialized bacterial blend are able to biologically remediate.
















Acenaphthene, Methylene Chloride, Acrolein Monoalkylbenzenes, Acrylonitrile, Motor Oils, Alkylamine,
Oxides, Napthulene, Aromatics, Nitrated Phenols, Benzene, Oil Base Paints, Biphenyl, Oil Base Fluids,
Brake Fluid, Oil Base Ink, Branched Hydrocarbons, Organic Herbicides, Chlorinated Phenols, Organic
Pesticides, Chloro Naphthalene, Pentane, Chlorobenzene, Phenoxyacetates, Chloroform, Phenylureas,
Crude Oils, Phthalate, Esters, Cyanide, Polycyclic Aromatics, Cutting Oils, Pulp By-Products,
Dichlorobenzene, Secondary Alkylbenzene, Diesel Fuels, Sodium Methyl Sulfate, Diethyleneglycol,
Sulfur, Ethylbenzene, Toluene, Fluoanthene, Trichloroethylene, Fuel Oils #1-6, Varsol, Gasoline,
Vegetable Oils, Grease, Xylene, Halogenated Hydrocarbons, Heating Oils, Heptane, Hexane, Isoprene,
Hydraulic Fluids, Hydrocarbons, Jet Fuels, Kerosene, Long Chained Alkenes, Lubricating Oils, Marine
Fuels, Mercaptan.

By combining the use of these specialized blend of bacteria with the AEFS Biological Oxidation System
you can achieve very high destruction/oxidation rate efficiencies. These efficiencies will exceed >99%.
Many advantages exists using the Biological Oxidation over conventional thermal oxidation, these are;
No fuel costs, No high electrical energy costs, Lowered insurance costs, No fuel emissions
such as
NOx or CO and Lower CO2. CO2 emissions are reduced by 80% over thermal oxidation.
OxyChem ReDox Font of Can
OxyChem ReDox Back Of Can
Emission Control
American Environmental
Fabrication & Supply, LLC


a
American Environmental Fabrication & Supply Logo
Natural Gas Conditioning
Gas Separation Systems
VOC Biofiltration Systems
Granulated Carbon Systems
VOC Concentrators
Automated PLC Controls
Equipment Inspections - Installation - Rebuilds
Low NOx Burners
PSA Systems
a
Products


a
Treatment Information
Helpful Equipment Information
Photo Gallery
Helpful Links
OxyChem ReDox Formula
Toll Free: +1 (866) 467 - 9374
Main: +1 (918) 708-1253
Benefits of Renting vs. Owning Air Pollution Control Equipment
We have a ready to use air pollution control fleet or can design a specialized system for your plant operations. Some of the available systems include:
Granulated Activated Carbon (GAC) Systems, Biological Oxidation Systems, Wet Scrubbers, Regenerative, Catalytic and Direct Fired
Thermal Oxidizers
. Rentals range from 6 months to 5 years with flexible options.
Product Inquiry
Purchase Plans
Services
© 2009 All Rights Reserved.   Visit our sitemap page for more information or contact the Webmaster.
Our working process
in 3 steps





planing & strategy





test & deliver





design & develop
Our Corporate goal is to implement the
proper metals, instruments and controls to
achieve the required result with the least
energy costs.
We pride ourselves in going the extra mile
We pride ourselves in going the extra mile
before it leaves the plant. It is our way of
and testing each piece of equipment and
testing each piece of equipment before it
leaves the plant. It is our way of knowing
that you are receiving correctly designed
equipment to meet your specific needs.
Implement proven equipment designs with
chemical, thermal and biological reactions
Results shall be based on reaction rates
and proper control logic.