Fabrication & Supply, LLC
Natural Gas Conditioning
Gas Separation Systems
VOC Biofiltration Systems
|Granulated Carbon Systems
|Equipment Inspections - Installation - Rebuilds
Low NOx Burners
Benefits of Renting vs. Owning Air Pollution Control Equipment
We have a ready to use air pollution control fleet or can design a specialized system for your plant operations. Some of
the available systems include: Granulated Activated Carbon (GAC) Systems, Biological Oxidation Systems, NG
Conditioning Systems,Wet Scrubbers, Regenerative, Catalytic and Direct Fired Thermal Oxidizers. Rentals
range from 6 months to 5 years with flexible options.
|Fuel Conditioning System For Natural Gas Engines
|Often Natural Gas from the well heads or midstream NG operations have too high BTU values to operate
natural gas engines that drive compressors and other power generation equipment. Oil and related
companies frequently have to use either electrical driven natural gas compressor systems, purchased
natural gas or use natural gas engines running at lower or de-rated values that require more frequent
In order to facilitate greater gas production and often comply with environmental issues concerning
unspent engine fuel companies are shifting the focus on reducing the field B.t.u. content for use on their
natural gas engines. American Environmental Fabrication & Supply has developed a proven patent
pending Fuel Conditioning B.t.u. reduction system to remove the higher molecular weighted
hydrocarbons (Wet NGL's) and supply a very clean stream of Methane. Higher weighted fuels will be
reduced by the fuel conditioning system allowing the natural gas engines to operate at 100% RPM
capacity without piston, motor damage or engine de-rating while allowing for fewer exhaust emissions.
We offer a full 24 month warranty on the B.t.u. Reduction System which applies to all system
components. Additionally, we offer full service and repair should you prefer that our technicians provide
preventive maintenance on the equipment. Systems may be designed for use with multiple natural gas
engines providing one system for multiple natural gas engine use. Often natural gas engines are within
close proximity to one another. When multiple natural gas engines occur within close proximity the system
can be designed to provide all the necessary natural gas needed to operate multiple natural
gas engines, reducing the amount of equipment necessary in the field.
Advantages of the Fuel Conditioning System
• Uses inexpensive capturing media as the adsorbent bed with years of adsorbent life.Equipment For More Information:
• Automatically adjusts B.t.u. outlet value based in inlet analysed gas stream.
• Has a small real estate foot print at (68 sq. ft).
• Operates with rapid B.t.u. fluctuations up to 2,000 BTU's without interruption or gas variation.
• Has few moving parts to reduce labor and maintenance costs.
• Operates in remote locations by a small solar panel (7amps @ 24vDC)
• Can economically reduce the B.t.u. content at low operating pressure <150 psi.
• Single Process VesselOperating Parameters
• Air or Electric Actuated Valves
• Adsorbed Media 3,000lbs.
• Field Gas or Midstream Gas between 2,000 to 1,150 B.t.u./Ft^3.
• Single GRIP Unit can supply fuel gas up to 1380 bhp
Toll Free: +1 (866) 467 - 9374
Main: +1 (918) 708-1253
© 2009 All Rights Reserved. Visit our sitemap page for more information or contact the Webmaster.
|Helpful Equipment Information
chemical, thermal and biological reactions
Implement proven equipment designs with
that achieves the required process result.
Results shall be based on reaction rates
and proper control logic.
Our Corporate goal is to implement the
correct design criteria with the use of
achieve the required result with the least
amount of maintenance and associated
We pride ourselves in going the extra mile
and testing each piece of equipment
before it leaves the plant. It is our way of
knowing that you are receiving correctly
designed equipment to meet your specific
The fuel conditioning system provides
unparalleled natural gas field production and the
ability to use standard natural gas engines and
compressors reducing equipment costs. By using
the fuel conditioning system there is No long lead
time for specialized compression packages.
The BTU reduction system is extremely reliable
and offers years of service with very minimal
Natural gas engines prefer to operate between
>950 B.t.u./Ft.^3 and <1050 B.t.u./Ft^3. This
revolutionary patent pending fuel conditioning
system accomplishes the reduction by gas enzyme
reaction process we term Gas Reduction Injection
Process or "GRIP" System.
|GRIP Gas Conditioning System
Midstream NG Fuel Inlet 1625 BTU
Midstream NG Fuel Outlet 998 BTU
BTU engine performance video
meeting. Specifically designed for
your purchase evaluation.